There was an error in this gadget

Monday, 21 March 2011

eric idle one of his best!

Tuesday, 15 March 2011

Foods that suppress iodine uptake

Goitrogenic drugs and chemicals

Chemicals that have been shown to have goitrogenic effects include:

* Sulfadimethoxine, propylthiouracil, potassium perchlorate, and iopanoic acid.[1]
* Some oxazolidines such as goitrin.[2]
* Thiocyanate overload in Central Africa, especially if also in conjunction with selenium deficiency.[3] Reliance on cassava as a carbohydrate provides a source of thiocyanate in some areas.[4]
* Ions such as thiocyanate and perchlorate decrease iodide uptake by competitive inhibition and, as a consequence of reduced thyroxine and triiodothyronine secretion by the gland, cause an increased release of thyrotropin (by reduced negative feedback), which then stimulates the gland.
* Amiodarone inhibits peripheral conversion of thyroxine to triiodothyronine; also interferes with thyroid hormone action.
* Lithium inhibits thyroid hormone release.
* Phenobarbitone, phenytoin, carbamazepine, rifampin induce metabolic degradation of T3 and T4.

Goitrogenic foods

Certain raw foods (cooking inactivates the goitrogens) have been identified as lightly goitrogenic. These foods include:

* cassava
* Soybeans (and soybean products such as tofu, soybean oil, soy flour, soy lecithin)
* Pine nuts
* Peanuts
* Millet
* Strawberries
* Pears
* Peaches
* Spinach
* Bamboo shoots
* Sweet Potatoes
* Vegetables in the genus Brassica [5]
o Bok choy
o Broccoli
o Broccolini (Asparations)
o Brussels sprouts
o Cabbage
o Canola
o Cauliflower
o Chinese cabbage
o Choy sum
o Collard greens
o Horseradish
o Kai-lan (Chinese broccoli)
o Kale
o Kohlrabi
o Mizuna
o Mustard greens
o Radishes
o Rapeseed (yu choy)
o Rapini
o Rutabagas
o Tatsoi
o Turnips

Thyroid hyperplasia has been demonstrated in mice:[6]

Despite being generally a stimulant, caffeine (examples: coffee, tea, cola, chocolate) acts on thyroid function as a suppressant.[7] Indeed some studies on rats suggest that excess caffeine in conjunction with a lack of iodine may promote the formation of thyroid cancers.[8]

Also, if you are still eating white bread made with bleached flour... stop doing it! The bromine used in the bleaching process can be taken up into the thyroid and cause dysfunction. Not to mention your body will absorb all that tasty radioactive iodine to replace the bromine you acquired from that bread you thought was good for you.

Saturday, 12 March 2011

Wednesday, 2 March 2011

U.S. patent application Aluminum soap demisting agent in jet fuel

This application is related to copending U.S. patent application Ser. No. 475,688 filed June 3, 1974.


1. Field of the Invention.

This invention relates to improved jet fuels. More particularly, this invention relates to compositions of matter comprising a mixture of a jet fuel and an aluminum di-acid soap of a saturated carboxylic acid having from 8 to 20 carbon atoms.

2. Description of the Prior Art.

When an airplane crashes or is forced to crash land or subjected to various other impulsive mishaps, its fuel tanks are often punctured or ruptured. When this happens, fuel from within the tanks spread into the atmosphere. Much of the fuel isin the form of a fine spray or mist. The tiny mist droplets are, because of their extremely large surface area, easily ignitable. If ignition occurs, a large, spreading fireball results.

It would be advantageous if the fuel were such that fine mist droplets were prevented from forming in the case of a fuel tank puncture or rupture mishap. That is, it would be advantageous if the viscosity were such that the fuel spread wasminimized and, should aspiration occur, relatively large drops rather than small mist droplets would form.

In the past, various materials have been added to jet fuels to increase viscosities. Polyisobutylene, polyisoprene, copolymers of ethylene acetate and vinyl acetate and various acrylic polymers and copolymers have been experimented with asdemisting agents. These materials have been added to the fuel in amounts varying from 0.1 to 3 percent of the total weight of the composition.

The prior art materials have had certain disadvantages associated with them. First, their demisting properties, i.e., their ability to make the viscosity of the fuel such that fine mists do not form when mishaps occur, have been detrimental toignition and combustion properties in engines. When the "demisted" fuel is injected into an engine for burning, the fuel is in the form of large drops. This makes ignition in the engine difficult. Ignition is particularly difficult during cold startsand after flameouts. Second, the previously tested materials tend to degrade when subjected to shear forces when the fuel is pumped. Single bond rupture of these very high molecular weight polymer chains causes very sharp reductions in the viscositycausing the fuel to lose its demisted quality. Third, occasions arise in maintenance of aircraft, when it is desirable to remove the fuel from the tanks. Fuels thickened with state of the art polymeric thickeners are difficult to remove and completelydrain from the aircraft (about 10% of the fuel remains as hold up).


It has now been found that certain aluminum soaps can be used as demisting agents in jet fuels. It has further been found that if certain amines are pumped into fuel lines carrying fuel which contains the aluminum soaps, the thickening(demisting) effect of the soaps is destroyed and the fuel, upon being injected into the engine by the fuel injectors, is injected as a fine mist.


Leonard Cohen, in U.S. Pat. No. 2,741,629, describes the preparation of an aluminum di-acid soap of mixed iso-octanoic acids. This soap is particularly useful in the practice of this invention. It is prepared by reacting mixed iso-octanoicacids with sodium hydroxide to form the sodium salt of the acids and water and then reacting the sodium salt with more sodium hydroxide and aluminum sulfate to form the soap. The soap comes out of the reaction mixture as a precipitate and is easilyrecovered.

Other aluminum di-acid soaps may be used in the practice of this invention. Any of those made from saturated carboxylic acids having from about 8 to about 20 carbon atoms are suitable. They can all be prepared by the method described by Cohen.

In the practice of this invention, either one or a mixture of two or more of the above-described aluminum soaps are added to jet fuel such as JP-4, JP-5, or Jet-A. The military jet fuels, JP-4 and JP-5 are described in Military SpecificationMIL-T-5624H. The civilian jet fuels such as Jet A and others are described in the American Society for Testing and Materials specification D 1655-74. An addition of from 0.1 to 1.0 weight percent of the total fuel is preferred. Such an additionincreases the viscosity of the fuel to a point where relatively large drops rather then fine mist droplets will form if a fuel tank containing the fuel is accidently punctured or ruptured. On the other hand, the viscosity of the fuel is still low enoughto permit the fuel to be pumped from existing, in-use fuel tanks through fuel lines.

Fuel which has had its viscosity increased by an addition of aluminum soaps according to this invention can be used as is with in-use fuel injectors. However, it is preferable to destroy the soaps in the fuel lines just before it enters theinjectors. To do this, one can inject a degelling agent selected from the group consisting of methyl amine, ethyl amine, n-propyl amine, iso-propyl amine, the primary butyl amines and the primary pentyl amines into the fuel line. Any of these amineswill destroy the aluminum soaps allowing the fuel to pass into and through the injectors as though it had never had a demisting agent added. The amines should be added to a fuel line at a rate which provides from about 0.001 to 0.005 gram of amine forevery gram of fuel passing the point of injection. It is preferable, although not necessary, to inject the amine into the fuel line at a point just prior to where the fuel leaves the line and enters the engine injector. Copending U.S. patentapplication Ser. No. 475,688 filed June 3, 1974 describes a method for degelling fuel prior to injecting it into a jet engine.

The Fluoride Deception exposes the truth about water fluoridation and th...

Co-op Hydrogen Fueling Stations on Farms

Co-op Hydrogen Fueling Stations on Farms

National Association of Radio-Distress Signalling and Infocommunications